An amplification of magnetic induction in permalloy allows a several times increase of the sensitivity of magneto-semiconductor mycrosystems magnetic field. While using the permalloy films as the magnetic concentrators, it is important to exclude the...
During formation of silver nanoparticles arrays by condensation to the cold substrate the initial condensate is non-stable. For the formation of non-stable arrays with the form, close to a spherical one, subsequent weak thermal treatment is required...
The most significant factors of reliability and durability of a microelectronic module are the design and technology of brazed and adhesive bonding, the elastic strength and plastic properties of the materials of silicon crystal, solder and glue join...
The air removal system significantly determines the ecological efficiency of the entire life-support providing clean rooms. In the work as a scientific basis for decision-making on the structure and configuration of the air removal system, the exerge...
The MOS dosimeters are used to keep track of the radiation dose for space, nuclear and medical industries, research laboratories and various applications like portable electronics and etc. MOSFET dosimeters constantly accumulate charge under the ioni...
The up-to-date nanostructures and nanomaterials, used as a part of the electronic component base, are characterized by high extent of heterogeneity and non-equilibrium. During operation of the device under thermal, electric and other effects its char...
The creation of methods for improving the trigger circuits in the direction of reducing the number of transistors and increasing their energy efficiency is an important task. For development of modern microelectronics the methods, allowing the synthe...
It is necessary to reduce the configuration bit stream volume if there is a need to write several FPGA configurations to the ROM. This leads to decrease in the topological size of the ROM block on the chip. The article discusses the development of th...
Reliable operation of mechanical sensors of the angular velocity and linear acceleration in modern conditions is possible only when their stable operation under effect of the external factors has been provided. The mechanical effects-broadband (sinus...