The problem of using diamond as a dielectric in the devices of microcircuits is an insufficient resolution of optical devices for controlling the light refraction coefficient, respectively, the dielectric permeability . In the work a fragment of a c...
The static method using a zero-manometer enables with high accuracy to perform measurements of the vapor pressure. The data on the temperature dependence of the substance non-saturated vapor (the condensed phase is absent) in the static experiment al...
The tricky optimization procedure of silicon-on-sapphire heteroepitaxy is one of the restricting factors to widespread utilization of the silicon-on-sapphire (SOS) wafers. In order to eliminate the given technological barrier in the work the process ...
For homogeneity of parameters of dielectrics more and more rigid requirements are claimed, especially while using them in the micro- and radioelectronic items. The purpose of the work is to develop an automated method for monitoring the electrical pa...
The absorbing elements of rectangular and complex form based on homogeneous resistive film are used for building wave guide, coaxial and microstrip attenuators. The decrease of the attenuators sizes leads to problems in the implementation of small an...
For operation of the control systems for mobile objects there is a need to consider the longitudinal and transverse component of the air velocity. In present work it has been proposed to use a measuring device of the airflow velocity on the basis of ...
In the control systems the FPGA systems more often are used as a central computing unit. However, high combination delays of the logic circuits on flexible logics and low maximum tact frequency of the FPGA systems restricts their application. The app...
For allocation and tracking of objects in the image the method based on the algorithms of singular points is applied. This approach is often used in the modules of video data initial processing for background stabilization. The hardware implementatio...
The article considers the algorithm of a representative samples formation for training the neural network of the multilayer perceptron. The purpose of the algorithm under consideration is the training set formation from the factor space and neuron ch...
The SOI MOSFET have the worst conditions of the heat removal from the active region, which negatively manifests itself on the reliability and efficiency of microcircuits. Using the TCAD modeling the self-heating effect has been investigated in the st...
For creating an optimal in terms of speed and flexibility programming the FPGA switching block it is necessary to estimate the minimum number of the commutation switches and their location in the connection matrix. In the work the problems of designi...
The investigation of various signal modulation methods remains an important task because of increasing requirements for communication and radar systems output information quality. To estimate the quality of the systems, using the signal compression f...