The experimental investigation of the laser pulse propagation through the scattering medium has been carried out. A method for determination of the scattering media optical characteristics has been offered. The method is based on measuring the tempor...
The sensitivity various parameters of the integrated circuits executed on different technologies to x-ray radiation and the possibility of predicting the level of the low-frequency noise have been considered.
A method for implementation of the integrated protection of bipolar transistors from the current overload in the control circuit based on a combination of the element with N-shaped volt-current characteristic (IVC) with a bipolar transistor has been ...
Some issues in designing the equalizer integrated circuit based on the heterojunction SiGe transistors have been considered. The specific feature of the device is the application of high-speed adjusted equalizer units. The simulation and experimental...
The formation of nanostructures by the method of the chemical precipitation from the gas phase using PECVD and glow-discharge plasma has been considered. The investigations were carried out in the 3000 - 700 °C temperature range. The influence of the...
The properties of the biological tissue laser nanowelding have been investigated. The high thermo- and photo stability of the solder composition based on the water albumin dispersion with the single-layer and multi-layer carbon nanotubes has been dem...
Two diacoptic methods completely solving the problem of the timing characterization of the static memory units have been presented [1]. The methods are distinguished by both the efficiency and the ways of maintaining the Spice-adequacy of the calcula...
The method based on using a piece approximation of the output reference voltage, which permits with a relatively equipment simplicity to obtain a low temperature coefficient of the reference voltage in a broad temperature range has been offered. A ci...
The results of investigation and designing of the technological processes of assembling and mounting MEMS components used for manufacturing breadboard samples have been presented.
The basics of modular logarithmetics over field GF(p) have been presented. The methods of the Gauss logarithm N variables calculation in the modular logarithmetics basis have been developed. The results of the modular logarithmetics architecture synt...
The possibility of the microwave amplitude-modulated optical vibrations detection via synchronizing the avalanche-diode oscillator by this microwave signal has been considered. The general properties of the oscillator-modulator have been discussed.
Some variants of the designs of the electromagnetic waves energy in a microstrip line of transfer to energy of fluctuations of the magnetization vector of spherical YIG-resonator from ittrium iron garnet (YIG) have been presented. The breadboard mode...
A complex electronic system for analyzing and testing the technical characteristics of hemodialysis machines, such as the blood pump displacement, pressures in arterial and venous tubing, et cetera, has been presented.
A fragment of structure in hexagon anamorphoze, which includes right tetrahedrons, has been described. Their positions and dimensions: height, edge, etc. have been determined.
The charge distribution in the environment of CMOS-nanostructure has been investigated using TCAD-modeling.
The technology-oriented approach of computer solid parametrically controlled modeling during the process of designing electronic devices has been described.