The process of creating the perspective radio engineering systems (RES) is connected not only with the search for original ideas and solutions, but, also, with the evaluation of their efficiency from positions of the engineering, technological and industrial realizability with specified resource and time restrictions. It includes the stages from the technical-economical proof and preparation of the design task to testing the samples of items and the delivery to a customer. For a successful fulfillment of the design life cycle the control and management over the process, which must take into consideration the variety of factors, influencing upon the quality of solutions being taken, are necessary. Besides, it is required to process and generalize the information vast volume. The purpose of this work is the information-algorithmic support for managing the process of creating the radio engineering systems (RES), the reduction of the risks of non-fulfillment of the technical assignment, the design time reduction by applying the mathematical modeling and the automated procedures of control at all stages of the item life cycle. The algorithmization of procedures for the optimal redistribution of resources, time and the changes of the work intensity at individual stages has been performed. Due to an increase of design, technological and production readiness of the items the risks of the work schedule violation with restricted resource and time expenses are significantly reduced.
1. Красковский И. Обзор состояния рынка систем PLM/TDM/PDM/Workflow//САПР и графика. – 2004. – № 12. – URL: https://sapr.ru/article/8330 (дата обращения 01.08.2018).
2. Беспалов В., Клишин В., Краюшкин В. Развитие систем PDM: вчера, сегодня, завтра… // САПР и графика. – 2002. – № 2. – URL: https://sapr.ru/article/6860 (дата обращения 01.08.2018).
3. Ширяев Н. Тенденции развития PLM-технологий 2014 // САПР и графика. – 2013. – № 12. – URL: https://sapr.ru/article/24304 (дата обращения 01.08.2018).
4. Буренок В.М. Проблемы создания системы управления полным жизненным циклом вооружений, военной и специальной техники // Вооружения и экономика. – 2014. – №2(27). – С. 4–9.
5. Норенков И.П. Основы автоматизированного проектирования: учебник для вузов. – М.: Изд-во МГУ им. Н.Э. Баумана, 2000. – 360 с.
6. Шубин Р.А. Надежность технических систем и техногенный риск: учеб. пособие. – Тамбов: Изд-во ФГБОУ ВПО «ТГТУ», 2012. – 80 с.
7. Соложенцев Е.Д. Сценарное логико-вероятностное управление риском в бизнесе и технике. – СПб.: Издат. дом «Бизнес-пресса», 2004. – 432 с.
8. Боев С.Ф. Метод создания высокоинформативных РЛС ВКО на базе событийной модели оценки рисков: науч.-метод. сб. ст. – Тверь: ЦНИИ Войск ВКО, 2014.
9. ГОСТ 2.103-68 ЕСКД. Стадии разработки. – М., 2002. – 3 с.
10. Сыпчук П.П, Талалай А.М. Методы статистического анализа при управлении качеством изготовления элементов РЭА. –М.: Сов.радио, 1979. – 168 с.
11. Федюкин В.К. Управление качеством процессов. – СПб.: Питер, 2004. – 208 с.
12. Иванов В.Г., Лосев В.В. Методика автоматизации проектирования источника опорного напряжения, определяемого шириной запрещенной зоны кремния // Изв. вузов. Электроника. – 2017. – Т. 22. – № 1. – С. 64–70.
13. Чебыкин А.Г., Меркутов А.С. Маршрут автоматизированного проектирования устройств формирования и обработки сигналов для спутниковых навигационных систем // Изв. вузов. Электроника. – 2015. – Т. 20. – № 2. – С. 145–153.
14. Ильин С.А. Выбор базовых схемотехнических решений для проектирования библиотек цифровых ячеек // Изв. вузов. Электроника. – 2015. – Т. 20. – № 1. – С. 44–49.