It is common practice to use mesoporous layers, nanofibers, nano-spheres of titanium oxide with various chemical and phase composition as electrodes for microbatteries. Studies of nanotubular anodic titanium oxide (TiO2 NT’s) properties have shown the relevance of using it as an anode electrode for sodium-ion batteries. In this work, a method for the modification of TiO2 NT’s, with the removal of the inner layer of nanotubes by etching in a mixture of sulfuric acid and hydrogen peroxide, is suggested. It was demonstrated that the inner, mesoporous layer of nanotubes hinders the embedding and extraction of sodium ions into the structure of TiO2 NT’s. Cyclic voltammetry studies showed that after removal of the inner part of the nanotubes, anodic and cathodic peaks appear, which are responsible for the extraction and intercalation of sodium ions, respectively. It has been established that there is no sodium ions intercalation into the crystal lattice of the TiO2 NT’s sample after the etching of the inner layer, which indicates the reversibility of the ion introduction process. Nanotube anode titanium oxide shows great potential for further research as an anode electrode in ionic accumulators and microbatteries due to its electrochemical characteristics and the possibility of different modification of the nanotube titanium oxide array.
-
Key words:
anodic titanium oxide, sodium-ion batteries, electrochemical cells, accumulators, nanostructures
-
Published in:
ELECTRONICS MATERIALS
-
Bibliography link:
Dronova D. A., Dronov A. A. Investigation of electrochemical properties of the anode of Na-ion battery based on nanotubular anodic TiO2. Proc. Univ. Electronics, 2023, vol. 28, no. 1, pp. 17–23. https://doi.org/10.24151/1561-5405-2023-28-1-17-23
-
Financial source:
the work has been supported by the Russian Foundation for Basic Research (grant No. 19-33-90287) and State Assignment No. FSMR-2023-0003.
1. Grey C., Tarascon J. Sustainability and in situ monitoring in battery development // Na-ture Mater. 2017. Vol. 16. P. 45–56.
https://doi.org/10.1038/nmat4777
2. Xiang X., Zhang K., Chen J. Recent advances and prospects of cathode materials for so-dium-ion batteries // Adv. Mater. 2015. Vol. 27. Iss. 36. P. 5343–5364.
https://doi.org/10.1002/adma.201501527
3. Hwang J.-Y., Myung S.-T., Sun Y.-K. Sodium-ion batteries: present and future // Chem. Soc. Rev. 2017. Vol. 46. Iss. 12. P. 3529–3614.
https://doi.org/10.1039/C6CS00776G
4. Chen J., Cheng F. Combination of lightweight elements and nanostructured materials for batteries // Acc. Chem. Res. 2009. Vol. 42. Iss. 6. P. 713–723.
https://doi.org/10.1021/ar800229g
5. The toxicity of lithium to human cardiomyocytes / J. Shen, X. Li, X. Shi et al. // Environ. Sci. Eur. 2020. Vol. 32. Art. No. 59.
https://doi.org/10.1186/s12302-020-00333-6
6. A comprehensive investigation on the thermal and toxic hazards of large format lithium-ion batteries with LiFePO4 cathode / Y. Peng, L. Yang, X. Ju et al. // Journal of Hazardous Ma-terials. 2020. Vol. 318. Art. No. 120916.
https://doi.org/10.1016/j.jhazmat.2019.120916
7. Toxicity identification and evolution mechanism of thermolysis-driven gas emissions from cathodes of spent lithium-ion batteries / Y. Chen, N. Liu, Y. Jie et al. // ACS Sustainable Chem. Eng. 2019. Vol. 7. Iss. 22. P. 18228–18235.
https://doi.org/10.1021/acssuschemeng.9b03739
8. Exploring competitive features of stationary sodium ion batteries for electrochemical energy storage / T. Liu, Y. Zhang, Zh. Jiang et al. // Energy Environ. Sci. 2019. Vol. 12. Iss. 5. P. 1512–1533.
https://doi.org/10.1039/C8EE03727B
9. Carbon-coated Na3.32Fe2.34(P2O7)2 cathode material for high-rate and long-life sodium-ion batteries / M. Chen, L. Chen, Z. Hu et al. // Adv. Mater. 2017. Vol. 29. Iss. 21. Art. No. 1605535.
https://doi.org/10.1002/adma.201605535
10. TiO2-Sn/C composite nanofibers with high-capacity and long-cycle life as anode mate-rials for sodium ion batteries / S. Nie, L. Liu, J. Liu et al. // Journal of Alloys and Compounds. 2019. Vol. 772. P. 314–323.
https://doi.org/10.1016/j.jallcom.2018.09.044
11. Babu B., Shaijumon M. M. Understanding how degree of crystallinity affects electro-chemical kinetics of sodium-ion in brown TiO2 nanotubes // ChemElectroChem. 2021. Vol. 8. Iss. 12. P. 2180–2185.
https://doi.org/10.1002/celc.202100047
12. Ti3+ induced brown TiO2 nanotubes for high performance sodium-ion hybrid capacitors / B. Babu, S. G. Ullattil, R. Prasannachandran et al. // ACS Sustainable Chem. Eng. 2018. Vol. 6. Iss. 4. P. 5401–5412.
https://doi.org/10.1021/acssuschemeng.8b00236
13. Galstyan V., Macak J. M., Djenizian T. Anodic TiO2 nanotubes: A promising material for energy conversion and storage // Applied Materials Today. 2022. Vol. 29. Art. No. 101613.
https://doi.org/10.1016/j.apmt.2022.101613
14. Investigation of anodic TiO2 nanotube composition with high spatial resolution AES and ToF SIMS / A. Dronov, I. Gavrilin, E. Kirilenko et al. // Applied Surface Science. 2018. Vol. 434. P. 148–154.
https://doi.org/10.1016/j.apsusc.2017.10.132
15. Differences in the local structure and composition of anodic TiO2 nanotubes annealed in vacuum and air / I. Gavrilin, A. Dronov, R. Volkov et al. // Applied Surface Science. 2020. Vol. 516. Art. ID: 146120.
https://doi.org/10.1016/j.apsusc.2020.146120
16. An insight of sodium-ion storage, diffusivity into TiO2 nanoparticles and practical reali-zation to sodium-ion full cell / S. Ghosh, V. K. Kumar, S. K. Kumar et al. // Electrochimica Ac-ta. 2019. Vol. 316. P. 69–78.
https://doi.org/10.1016/j.electacta.2019.05.109